Articulating Mirror

Description

Tired of the cheesy windshield mount mirror? Step up to a wake tower articulating mirror.

Most aftermarket wakeboard tower mirrors use a single piece arm. This means that you mount it to the tower and there is no adjust-ability to it. Where you mount it is what you see. When using an articulating arm, you have so many options for adjustment. Since we use a 2 piece arm, there are actually more points that you use for adjustment.

Install your wake tower articulating mirror higher or lower on the tower, the choice is yours. You can even mount on the top of the tower onto the Top Bar or H-Member. Installation is so simple, and we know you’ll love that!

• Polished Aluminum Arms
• Center pivot allows you to position the mirror for the best viewing (Note: Most single arm mirrors don’t work right on towers)
• 7″ x 13″ Tournament CONVEX Mirror
• Fits 1-7/8″, 2″, 2-1/4″, 2-3/8″, 2.5″, 2-7/8″, and 3″ tubing sizes. (Please note, liners are not used when mounting to 2.5″ tubing)

To determine your tubing size for the correct clamp fitment, you will need to measure the circumference (all the way around) of the tubing you will be attaching to. With the measurement that you have just taken, choose from the closest option below.

Circumference and clamp choices:

• If you have approx. 5.89″ circumference (1 7/8″ diameter), choose the 2.5″ clamp
• If you have approx. 6.28″ circumference (2″ diameter), choose the 2.5″ clamp
• If you have approx. 7.06″ circumference (2 1/4″ diameter), choose the 2.5″ clamp
• If you have approx. 7.47″ circumference (2 3/8″ diameter), choose the 2.5″ clamp
• If you have approx. 7.85″ circumference (2 1/2″ diameter), choose the 2.5″ clamp
• If you have approx. 9″ circumference (2 7/8″ diameter), choose the 3″ clamp
• If you have approx. 9.42″ circumference (3″ diameter), choose the 3″ clamp