Twister Tower

Description

The Big Air Twister Tower offers you everything that you asked for in a tower! The Twister Tower’s integrated rear leg swiveling racks will hold a total of four standard wakeboards (two per side) for four times the fun on the water. No need to reach out to get your boards, just loosen the knob and swivel your boards in towards you! Collapses in minutes, for ease of storage in your garage or storage location.

The Twister Tower has a standard yet modern look with 2.25″ tubing throughout the tower and a standout billet plating design for the rear legs. The Big Air Twister Tower is incredibly rigid for a stable pull behind the boat and makes your boat look better than anything else on the water.

Tired of low-height towers you hit your head on …Not with the Twister tower. Standing at about 5 feet tall from the mounts to the top of the tower, the average tower height when mounted is approximately 7 feet (with standard 2 feet gunnels). Yeah…that’s right, 7 FEET! This allows you to install speakers and biminis without all the clearance issues other towers have. The Twister Tower can accommodate any boat between 72″ and 103″ width, for a truly universal design that will fit almost any boat on the market.

Please note: Swiveling wakeboard racks are included. Additional accessories are sold separately.

• Fits most boats from 72″-103″ wide
• Available in a high-quality polished finish or a gloss black powder coat finish
• High-quality 6061-T6 aluminum tubing results in a strong tower that is lightweight
• 2.25″ large diameter – flex-reducing aluminum tubing
• The front-to-back stance on the Twister Tower is approximately 66 inches
• Telescoping top section makes installation easy on any boat
• The Big Air Twister tower can mount on the side or on top of boat gunnels
• Tower stands roughly 5 feet from mounting points with a 12-degree inward taper
• Secure design creates for a silent tower that will not rattle, creak or moan in rough water
• Designed with finite element analysis structures to reduce tower flexure
• Dual swiveling rope head to offer free rope movement
• The Twister Tower collapses in just minutes. Approximately 18″-26″ height above the gunnel when collapsed
• The Twister Tower has wakeboard racks included. The Twister’s built-in swiveling racks come standard to hold four wakeboards
  • Upgrades can be made to accept combo, wake surf, or even triple rack options.
• Most biminis fit under our towers.
• Pre-drilled corner connection for ease of wiring installation through the front tower legs.
• Mounting hardware and backing plates are included
• Large aluminum backer plates are included to give your hull the support it needs
• Single bolt mounts minimize the amount of drilling through your hull
• Incredibly easy to install (typically 3 to 4 hours) at home or by your Big Air retailer
• This tower can accommodate the following Big Air Bimini choices:
  • Super Shadow bimini – Over the tower bimini
  • Collapsible Bimini – Under tower, custom width bimini
  • Tube Top Bimini – Over the tower bimini that stores your tubes
• 5-year limited warranty
• Swiveling racks are included, other accessories are sold separately

Want to see this tower on YOUR boat? The Big Air Tower Visualizer is the perfect tool. Upload a side profile photo of your boat and try it now!

Or, check out the customer photo gallery.